CODAN Digital Microwave Radio

Digital Microwave Radio CODAN 8800  - 7 GHz to 38 GHz

The CODAN Digital Microwave Radio (DMR) provides 16 E1 (16 DS1), E3 (DS3), and 10/100BaseT ETHERNET transmission on an indoor unit and outdoor unit hardware platform. This is common across the entire frequency range from 7 GHz to 38 GHz.

This lightweight and rugged DMR delivers an exceptionally high grade of link performance particularly in difficult propagation conditions. In protected configurations, the CODAN 8800 offers 100% redundancy and uses advanced signal combining techniques to achieve exceptional link reliability.

The CODAN 8800 series digital microwave radios complies with the international standards for safety, spectrum emission and data transmission.

The product is software scalable and can be configured either locally or remotely. For large network roll-outs, installation can be undertaken by semi-skilled labour on site with commissioning by technical staff at a remote location.

All CODAN equipment is backed by a three year warranty and CODAN worldwide support network.

Key features

• Adaptive Reed-Solomon Forward Error Correction (FEC) provides a high grade of service through high immunity to multi-path reflections
• Continuous Phase Modulation is robust and gives exceptional performance in high interference environments
• Adaptive Receiver Intermediate Frequency Control substantially reduces adjacent channel rejection
• Automatic Transmit Power Control (ATPC) and Remote Transmitter Power Control (RTPC) parameters are software controlled
• CODAN MINET, the Windows® based element manager, controls and monitors the network configuration via the SNMP Network Management Interface. CODAN MINET can control data transmission capacity and firmware upgrades throughout the network.
• 100% equipment redundancy is featured in Hot Standby and Space Diversity configurations. Redundancy  switching  decisions are optimised for space diversity operation.

Data interfaces

Digital Microwave Radio Network Management

CODAN MINET is an intuitive, network management system with enhanced monitoring and diagnostic tools. It provides a simple graphical user interface to configure and manage local, remote and network radio terminals. Reporting of alarm status and statistical performance data further enhances CODAN MINET capability.

Because MINET is based on a standard SNMP platform it can be easily integrated with HP Open View.

The software enables proactive management of all links in a network from either single or multiple operator consoles running Microsoft Windows NT®, 98 or later.

Any Ethernet LAN attached management station running CODAN MINET can also be used to conveniently manage an IDU via the unit’s 10BaseT Ethernet management interface. SNMP management and cascading between IDU are standard features.

All radio links are easily controlled from the management station by either in-band or out-of-band signalling. IP Routers in each agent distribute the management information through the network to provide simultaneous management of all links from a single console. Inclusion of Trivial File Transfer Protocol (TFTP) capability enables remote site configuration and firmware upgrades.

With MINET definable alarm mapping capability, users can customize link and external alarm reporting criteria.

Digital Microwave Radio Redundant Operation

The 8800 series digital microwave radio supports 100% redundancy in a 2RU solution with either single or dual antenna configurations.

Redundancy switching decisions are conditioned by parameters such as:

• Link Status (fault condition)
• User Definable Receive Signal Level
• BER performance

The controlling algorithm provides hitless switching between the main and standby receiver paths. Space and frequency diversity operation is also supported.

A single antenna configuration requires the installation of an RF splitter. The splitter is optionally available as either:

• an asymmetric split of 1.8 dB for the main branch and 6.5 dB split for the standby branch;
• a symmetrical 3 dB split for both main and standby branches.

System Parameters

7-8 GHz

10.5 GHz

13 GHz

15 GHz

18 GHz

23 GHz

26 GHz

38 GHz

ETSI

FCC

ETSI

ETSI

ETSI

ETSI

FCC

ETSI

FCC

ETSI

ETSI

FCC

Frequency range

7.1-8.5 GHz

10.5–10.7 GHz

12.75-13.25 GHz

14.40-15.35 GHz

17.7-19.7 GHz

21.2-23.6 GHz

24.5-26.5 GHz

37.0-39.5 GHz

38.6-40 GHz

Tx–Rx duplex frequency

7.1-7.9 GHz 154 MHz 161 MHz 245 MHz

7.7-8.5 GHz 119 MHz 126 MHz 311.32 MHz

65 MHz 91 MHz

266 MHz

315 MHz 420 MHz 490 MHz 644 MHz

1010 MHz

1560 MHz

1008 MHz 1200 MHz 1232 MHz

1200 MHz

1008 MHz

1260 MHz

700 MHz

RF interface

Slip fit, WR112 aperture

Slip fit, WR90 aperture

Slip fit, WR62 aperture

Slip fit, WR62 aperture

Slip fit, WR42 aperture

Slip fit, WR42 aperture

Slip fit, WR42 aperture

Slip fit, WR28 aperture

System gain for BER=10-3

4E1 (4 DS1) 8E1 (8 DS1) 16E1 (16DS1)

115 dB 112 dB 109 dB

114 dB 111 dB 108 dB

114 dB 111 dB 108 dB

113 dB 110 dB 107 dB

111 dB 108 dB 105 dB

107 dB 104 dB 101 dB

107.5 dB 104.5 dB 101.5 dB

107.5 dB 104.5 dB 101.5 dB

109 dB 105 dB 102.5dB

107.5 dB 104.5 dB 101.5 dB

101 dB 99 dB 96 dB

101.5 dB 98.5 dB 95 dB

Link ID security codes

10 000 programmable codes

10 000 programmable codes

10 000 programmable codes

10 000 programmable codes

10 000 programmable codes

10 000 programmable codes

10 000 programmable codes

10 000 programmable codes

Transmitter

Tx output power

+24 dB

+27 dB

+27 dB

+25 dB

+22 dB

+22 dB

+22 dB

+19 dB

Software controlled output power adjustment range

35 dB in 1 dB steps

35 dB in 1 dB steps

35 dB in 1 dB steps

35 dB in 1 dB steps

30 dB in 1 dB steps

30 dB in 1 dB steps

30 dB in 1 dB steps

27 dB in 1 dB steps

Tx mute level

< -45 dB

< -45 dB

< -45 dB

< -45 dB

< -45 dB

< -45 dB

< -45 dB

< -45 dB

Frequency stability

±5 ppm

±5 ppm

±5 ppm

±5 ppm

±5 ppm

±5 ppm

±5 ppm

±5 ppm

Transmitter IF

400 MHz

400 MHz

400 MHz

400 MHz

400 MHz

400 MHz

400 MHz

400 MHz

Receiver

Frequency stability

±5 ppm

±5 ppm

±5 ppm

±5 ppm

±5 ppm

±5 ppm

±5 ppm

±5 ppm

Receiver IF

140 MHz

140 MHz

140 MHz

140 MHz

140 MHz

140 MHz

140 MHz

140 MHz

Sensitivity BER=10-3

4 E1/DS1 8 E1/DS1 16 E1/DS1

-87 dB -84 dB -81 dB

-86 dB -83 dB -80 dB

-87 dB -84 dB -81 dB

-86 dB -83 dB -80 dB

-86 dB -83 dB -80 dB

-85 dB -82 dB -79 dB

-85.5 dB -82.5 dB -79.5 dB

-85 dB -82 dB -79 dB

-87 dB -83 dB -80.5 dB

-85 dB -82 dB -79 dB

-82 dB -80 dB -77 dB

-82.5 dB -79.5 dB -76 dB

Sensitivity BER=10-6

4 E1/DS1 8 E1/DS1 16 E1/DS1

-84 dB -81 dB -78 dB

-83 dB -80 dB -77 dB

-84 dB -81 dB -78 dB

-83 dB -80 dB -77 dB

-83 dB -80 dB -77 dB

-82 dB -79 dB -76 dB

-82.5 dB -79.5 dB -76.5 dB

-82 dB -79 dB -76 dB

-84 dB -81 dB -79.5 dB

-82 dB -79 dB -76 dB

-80 dB -77 dB -74 dB

-79.5 dB -76.5 dB -73 dB

Maximum RF input level

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

Mechanical

IDU dimensions (1+0)	44.5mm (1RU) x 430mm x 305mm       1.75" x 19" x 12" (H x W x D)
IDU dimensions (1+1)	89mm (2RU) x 430mm x 305mm 3.5" x 19" x 12" (H x W x D)
IDU weight (1+0)	4.6 kg (1+1) 9.2 kg (1+0) 10 lb (1+1) 20 lb
ODU dimensions (1+0)	230mm x 175mm 9" x 6.9" (Dia x H)
ODU dimensions (1+1)	230mm x 400mm 9" x 16" (Dia x H)
ODU weight (1+0)	4.9 kg (1+1) 11.3 kg (1+0) 10.8 lb (1+1) 25.6 lb

Environmental

Altitude	4500m AMSL (15000 ft)
IDU temperature range	–10°C to +45°C
IDU relative humidity	Up to 95% at +40°C
ODU temperature range	–55°C to +55°C
ODU relative humidity	Up to 100% all weather

IDU/ODU connection

Single 50 Ω coaxial cable of up to 300 meters (1000 ft) for each outdoor unit

Power requirements

Digital Microwave Radio | DMR | PDH